BLACK FRIDAY IS BACKNov 24 to 30. Join the list and get in a day early.Join the list

Wallet transfers (w=, y=) by exchange

Autoview · Guide · Updated November 16, 2026

An Autoview alert can do more than place orders. On some exchanges it can move a coin from one wallet to another, for example from spot into futures before a trade, or back to spot after one. Two keys do it: w= names the coin and y= names the direction. The words y= accepts are different on every exchange, and so is what a q=50% is half of.

This page comes from the Autoview integrations code that runs on our servers today. We read the code; we did not send these transfers live for this guide.

How a transfer line works

e=binance w=USDT y=futures q=50 d=1
  • w= is the coin. It is read in capitals, so w=usdt and w=USDT are the same. A comma list such as w=USDT,BTC moves each coin with the same q=.
  • y= is the direction. It is read in lower case. Leave it out and Autoview uses y=balance, which most exchanges reject with "Wallet Type not found".
  • q= is the amount. A plain number is that many coins. A percent is taken of a balance only where the tables below say so.
  • A w= line is only a transfer. Autoview checks for w= before it looks at t=, so the same line never places an order. A c= cancel or close is checked first, so c= plus w= closes and moves nothing. Put the transfer on its own line.
  • d=1 works. With d=1 Autoview writes the transfer it would make to your log and sends nothing.

Exchanges not on this page have no transfer command in Autoview. A w= line there is refused as an unsupported feature. The HTX connection has transfer code written but switched off, so it refuses too.

Binance spot (e=binance)

y=MovesA q= percent is taken of
futuresSpot to USD-M futuresYour spot balance of the coin
deliverySpot to COIN-M deliveryYour spot balance of the coin
marginSpot to cross marginYour spot balance of the coin
isolatedSpot to the isolated margin account of s=Your spot balance of the coin
spotCross margin back to spotYour cross margin balance
spot-isolatedIsolated margin of s= back to spotYour isolated margin balance
spot-futures, spot-deliveryUSD-M futures or COIN-M delivery back to spotNothing. Use a plain amount.
borrow, repayTake out or repay a cross margin loanWhat Binance reports you can borrow or move

On spot-futures and spot-delivery, Autoview reads no balance, so q=50% is sent as 0.5 of the coin, not half of your futures wallet. The Binance command reference has more examples.

Binance Futures and Binance Delivery

On these connections, a transfer back to spot does not work. y=spot on e=binancefutures always ends in "Spot Futures transferring error.", and on e=binancedelivery in "Spot Delivery transferring error.". Send the transfer from the spot connection instead, with e=binance y=spot-futures or y=spot-delivery.

Binance Futures has one more use for w=. With y=balance, which is also the default, w= holds an amount, not a coin, and Autoview adds that much margin to the s= position through Binance's position margin call. A negative amount removes margin. In hedge mode, b=buy or b=long picks the long side and anything else the short side.

e=binancefutures s=BTCUSDT b=long w=25 d=1

Bitfinex (e=bitfinex)

y=MovesA q= percent is taken of
marginExchange wallet to margin walletThe coin's available balance in the exchange wallet
spotMargin wallet back to the exchange walletThe coin's available balance in the margin wallet

Bitfinex takes one coin per line. A list in w= is refused before anything is sent.

Bitget (e=bitget)

On Bitget, y= is the name of the wallet: usdt_futures, usdc_futures, coin_futures, crossed_margin, isolated_margin, p2p, and on a Unified Trading Account also uta. A bare name moves funds from spot into that wallet. Put spot- in front to move them back, for example y=spot-usdt_futures. isolated_margin also uses the s= pair. On a Unified Trading Account, spot means Bitget's funding wallet.

  • A percent is taken of your spot balance when moving out of spot. Moving back into spot reads no balance, except from uta, where it uses the amount Bitget reports you can move.
  • If one coin in a list fails, the error goes to your log and the next coin still runs.
  • With aid= set to a sub-account UID, the line moves funds from the main account to that sub-account. y=main pulls them back, as a plain amount. Use the main account's API key.
e=bitget w=USDT y=usdt_futures q=100 d=1

Bybit (e=bybit, e=bybitspot)

y=MovesA q= percent is taken of
UNIFIED, CONTRACT, FUNDSpot to that accountThe coin's free balance in your Bybit trading account
SPOT-CONTRACTContract account back to spotNothing. Use a plain amount.
SPOT-UNIFIED, SPOT-FUNDUnified or Funding account back to spotNothing, and a percent becomes 0, so no transfer is sent

Case does not matter here. As on Bitget, a failed coin is logged and the rest of the list carries on. The Bybit command reference covers the rest of the Bybit keys.

On Bybit copy trading (e=bybitcopy), y=COPY moves funds from the contract account to the copy trading account and y=CONTRACT moves them back. Both take a percent of the account's available balance. Any other y= is refused.

Gate.io spot (e=gate)

y=futures, delivery, margin, cross_margin and options move funds out of spot. Put spot- in front to move them back, such as y=spot-futures. y=margin also uses the s= pair. Gate.io spot refuses a percent: write a plain amount.

Gate.io futures (e=gatefutures)

The futures connection names directions from the futures side, which reverses one of them:

  • y=spot, margin, cross_margin, delivery and options move funds out of futures.
  • y=spot-futures moves funds from spot into futures. On the spot connection the same words move them the other way.
  • Any other y=, including the default balance, does nothing and reports no error.
  • Autoview reads no balance here, so a percent is not a share of anything. Use a plain amount.

The Gate.io command reference lists the Gate.io trading keys.

Kraken (e=kraken)

  • y=futures moves the coin from your spot wallet to your futures wallet. A percent is taken of your spot balance. Autoview matches w= against the asset names in Kraken's balance list without translating them.
  • y=stake and y=unstake put a coin into Kraken Earn or take it out. Autoview picks an instant strategy first, then the one with the lowest fee, and skips a coin with no strategy it can use. A percent is refused. The API key needs Kraken's "Earn Funds" permission.

Kraken Futures (e=krakenfutures)

  • y=spot sends the coin from your futures cash or flex wallet back toward spot through Kraken Futures' withdrawal call. A percent is taken of that wallet's balance.
  • y=single moves the coin from your futures cash account into the single-collateral margin account of the s= contract. Without s=, the line is refused.

KuCoin spot (e=kucoin)

y=Moves
main, margin, isolated, contractTrading account to that account
trade-main, trade-margin, trade-isolatedThat account back to the trading account
spotMargin back to the trading account, the same as trade-margin
borrow, repayTake out or repay a margin loan

A percent is taken of the amount KuCoin reports you can move from the source account. For borrow it is a share of what the margin market offers, and for repay a share of what you owe. If KuCoin reports nothing to move for a coin, Autoview stops there and moves nothing more on that line.

Test it before you rely on it

Keep d=1 on the line and send it. The log shows the coin, the amount and both wallets, and nothing moves. The log guide shows where to look. To use the funds you moved, see spot margin trading by exchange and collateral balance by exchange.

See the full command reference